Ways to Build Solar Panels and Create a Home Solar Power Plant In Three Easy Stages
With today’s climbing fuel costs it is becoming more and more realistic for you to say goodbye to the grid, and start generating your own electricity from renewable sources. One of the methods you can use is to generate energy from the sun. This is achieved by using a solar panel, which converts sunlight to electrical energy, and then routing this through a battery bank, so that the surplus is stored for use when the sun isn’t shining.
Unfortunately solar panels can be expensive, and if you want to be totally self sufficient you are going to need a lot of them. Luckily you can build solar panels for a lot less than commercially finished ones cost.. Listed here are my best three ideas to help you to succeed in making your solar power dream a reality.
1. The Solar Panel. – As previously mentioned commercially built panels cost a fortune. To make your own you simply need to buy photo voltaic cells. This type of cell reacts to sunlight by producing an electrical current. You simply need to connect these cells together in series, and lay this matrix into a wooden frame with a glass cover. The cells are available on-line, and the timber and glass for the frame you can get from a hardware store. Don’t worry basic wiring instructions will be supplied with your cells.
2. The Battery Bank. – The power from your panels should be routed to a bank of deep cycle rechargeable batteries. The good news is you can pick up used ones for free in most cases. These can then be easily reconditioned for use in your storage unit. Using a battery bank will make sure you have a consistent electrical supply even if the sun isn’t shining. This is a vital element of your home power plant.
3. The Power Inverter. – Finally your 12v DC output from your battery bank has to be put through a circuit that will convert it into AC power at a suitable voltage to be used in your home. You don’t have to understand how this power inverter works, it will come as a complete unit, all you do is connect your battery output to its input, and the inverted output to your domestic wiring system.
Following these tips will aid you to successfully build solar panels, and install a home solar power system. Keeping the cost down by making the components yourself, will mean your installation will pay for itself in the shortest possible time. After this point you will enjoy virtually free energy. Using solar power you will save money, and save our planet too.